Wilderness
Outside the safety of city walls, the wilderness is a dangerous place, and many adventurers have gotten lost in its trackless wilds or fallen victim to deadly weather. The following rules give you guidelines on running adventures in a wilderness setting.
Getting Lost
There are many ways to get lost in the wilderness. Following an obvious road, trail, or feature such as a stream or shoreline prevents most from becoming lost, but travelers striking off cross-country might become disoriented—especially in conditions of poor visibility or in difficult terrain.
Poor Visibility
Anytime characters cannot see at least 60 feet due to reduced visibility conditions, they might become lost. Characters traveling through fog, snow, or a downpour might easily lose the ability to see any landmarks not in their immediate vicinity. Similarly, characters traveling at night might be at risk, too, depending on the quality of their light sources, the amount of moonlight, and whether they have darkvision or low-light vision.
Difficult Terrain
Any character in forest, moor, hill, or mountain terrain might become lost if he moves away from a trail, road, stream, or other obvious path or track. Forests are especially dangerous because they obscure far-off landmarks and make it hard to see the sun or stars.
Chance to Get Lost
If conditions exist that make getting lost a possibility, the character leading the way must succeed on a Survival check or become lost. The difficulty of this check varies based on the terrain, the visibility conditions, and whether or not the character has a map of the area being traveled through. Refer to the table below and use the highest DC that applies.
Terrain
| Terrain | Survival DC |
|---|---|
| Desert or plains | 14 |
| Forest | 16 |
| Moor or hill | 10 |
| Mountain | 12 |
| Open sea | 18 |
| Urban, ruins, or dungeon | 8 |
| Situation | Check Modifier |
| Proper navigational tools (map, sextant) | +4 |
| Poor visibility | –4 |
A character with at least 5 ranks in Knowledge (geography) or Knowledge (local) pertaining to the area being traveled through gains a +2 bonus on this check.
Check once per hour (or portion of an hour) spent in local or overland movement to see if travelers have become lost. In the case of a party moving together, only the character leading the way makes the check.
Effects of Being Lost
If a party becomes lost, it is no longer certain of moving in the direction it intended to travel. Randomly determine the direction in which the party actually travels during each hour of local or overland movement. The characters' movement continues to be random until they blunder into a landmark they can't miss, or until they recognize that they are lost and make an effort to regain their bearings.
Recognizing You're Lost
Once per hour of random travel, each character in the party may attempt a Survival check (DC 20, –1 per hour of random travel) to recognize that he is no longer certain of his direction of travel. Some circumstances might make it obvious that the characters are lost.
Setting a New Course
Determining the correct direction of travel once a party has become lost requires a Survival check (DC 15, +2 per hour of random travel). If a character fails this check, he chooses a random direction as the “correct” direction for resuming travel.
Once the characters are traveling along their new course, correct or incorrect, they might get lost again. If the conditions still make it possible for travelers to become lost, check once per hour of travel as described above to see if the party maintains its new course or begins to move at random again.
Conflicting Directions
It's possible that several characters may attempt to determine the right direction to proceed after becoming lost. Make a Survival check for each character in secret, then tell the players whose characters succeeded the correct direction in which to travel, and tell the players whose characters failed a random direction they think is right, with no indication who is correct.
Regaining Your Bearings
There are several ways for characters to find their way after becoming lost. First, if the characters successfully set a new course and follow it to the destination they're trying to reach, they're not lost anymore. Second, the characters, through random movement, might run into an unmistakable landmark. Third, if conditions suddenly improve—the fog lifts or the sun comes up—lost characters may attempt to set a new course, as described above, with a +4 bonus on the Survival check.
Forest Terrain
Forest terrain can be divided into three categories: sparse, medium, and dense. An immense forest could have all three categories within its borders, with more sparse terrain at the outer edge of the forest and dense forest at its heart.
The table below describes in general terms how likely it is that a given square has a terrain element in it.
Category of Forest
| Category of Forest | |||
|---|---|---|---|
| Sparse | Medium | Dense | |
| Typical trees | 50% | 70% | 80% |
| Massive trees | — | 10% | 20% |
| Light undergrowth | 50% | 70% | 50% |
| Heavy undergrowth | — | 20% | 50% |
Trees
The most important terrain element in a forest is the trees, obviously. A creature standing in the same square as a tree gains partial cover, which grants a +2 bonus to Armor Class and a +1 bonus on Reflex saves. The presence of a tree doesn't otherwise affect a creature's fighting space, because it's assumed that the creature is using the tree to its advantage when it can. The trunk of a typical tree has AC 4, hardness 5, and 150 hp. A DC 15 Climb check is sufficient to climb a tree. Medium and dense forests have massive trees as well. These trees take up an entire square and provide cover to anyone behind them. They have AC 3, hardness 5, and 600 hp. Like their smaller counterparts, it takes a DC 15 Climb check to climb them.
Undergrowth
Vines, roots, and short bushes cover much of the ground in a forest. A space covered with light undergrowth costs 2 squares of movement to move into, and provides concealment. Undergrowth increases the DC of Acrobatics and Stealth checks by 2 because the leaves and branches get in the way. Heavy undergrowth costs 4 squares of movement to move into and provides concealment with a 30% miss chance (instead of the usual 20%). It increases the DC of Acrobatics checks by 5. Heavy undergrowth is easy to hide in, granting a +5 circumstance bonus on Stealth checks. Running and charging are impossible. Squares with undergrowth are often clustered together. Undergrowth and trees aren't mutually exclusive; it's common for a 5-foot square to have both a tree and undergrowth.
Forest Canopy
It's common for elves and other forest dwellers to live on raised platforms far above the surface floor. These wooden platforms often have rope bridges between them. To get to the treehouses, characters ascend the trees' branches (Climb DC 15), use rope ladders (Climb DC 0), or take pulley elevators (which can be made to rise a number of feet equal to a Strength check, made each round as a full-round action). Creatures on platforms or branches in a forest canopy are considered to have cover when fighting creatures on the ground, and in medium or dense forests they have concealment as well.
Other Forest Terrain Elements
Fallen logs generally stand about 3 feet high and provide cover just as low walls do. They cost 5 feet of movement to cross. Forest streams average 5 to 10 feet wide and no more than 5 feet deep. Pathways wind through most forests, allowing normal movement and providing neither cover nor concealment. These paths are less common in dense forests, but even unexplored forests have occasional game trails.
Stealth and Detection in a Forest
In a sparse forest, the maximum distance at which a Perception check for detecting the nearby presence of others can succeed is 3d6 × 10 feet. In a medium forest, this distance is 2d8 × 10 feet, and in a dense forest it is 2d6 × 10 feet.
Because any square with undergrowth provides concealment, it's usually easy for a creature to use the Stealth skill in the forest. Logs and massive trees provide cover, which also makes hiding possible.
The background noise in the forest makes Perception checks that rely on sound more difficult, increasing the DC of the check by 2 per 10 feet, not 1.
Forest Fires
Most campfire sparks ignite nothing, but if conditions are dry, winds are strong, or the forest floor is dried out and flammable, a forest fire can result. Lightning strikes often set trees ablaze and start forest fires in this way. Whatever the cause of the fire, travelers can get caught in the conflagration.
A forest fire can be spotted from as far away as 2d6 × 100 feet by a character who makes a Perception check, treating the fire as a Colossal creature (reducing the DC by 16). If all characters fail their Perception checks, the fire moves closer to them. They automatically see it when it closes to half the original distance. With proper elevation, the smoke from a forest fire can be spotted as far as 10 miles away.
Characters who are blinded or otherwise unable to make Perception checks can feel the heat of the fire (and thus automatically “spot” it) when it is 100 feet away.
The leading edge of a fire (the downwind side) can advance faster than a human can run (assume 120 feet per round for winds of moderate strength). Once a particular portion of the forest is ablaze, it remains so for 2d4 × 10 minutes before dying to a smoking wasteland. Characters overtaken by a forest fire might find the leading edge of the fire advancing away from them faster than they can keep up, trapping them deeper and deeper within its grasp.
Within the bounds of a forest fire, a character faces three dangers: heat damage, catching on fire, and smoke inhalation.
Heat Damage
Getting caught within a forest fire is even worse than being exposed to extreme heat (see Heat Dangers). Breathing the air causes a character to take 1d6 points of fire damage per round (no save). In addition, a character must make a Fortitude save every 5 rounds (DC 15, +1 per previous check) or take 1d4 points of nonlethal damage. A character who holds his breath can avoid the lethal damage, but not the nonlethal damage. Those wearing heavy clothing or any sort of armor take a –4 penalty on their saving throws. Those wearing metal armor or who come into contact with very hot metal are affected as if by a heat metal spell.
Catching on Fire
Characters engulfed in a forest fire are at risk of catching on fire when the leading edge of the fire overtakes them, and continue to be at risk once per minute thereafter.
Smoke Inhalation
Forest fires naturally produce a great deal of smoke. A character who breathes heavy smoke must make a Fortitude save each round (DC 15, +1 per previous check) or spend that round choking and coughing. A character who chokes for 2 consecutive rounds takes 1d6 points of nonlethal damage. Smoke also provides concealment to characters within it.
Marsh Terrain
Two categories of marsh exist: relatively dry moors and watery swamps. Both are often bordered by lakes (described in Aquatic Terrain), which are effectively a third category of terrain found in marshes.
Marsh Category
| Marsh Category | ||
|---|---|---|
| Moor | Swamp | |
| Shallow bog | 20% | 40% |
| Deep bog | 5% | 20% |
| Light undergrowth | 30% | 20% |
| Heavy undergrowth | 10% | 20% |
Bogs
If a square is part of a shallow bog, it has deep mud or standing water of about 1 foot in depth. It costs 2 squares of movement to move into a square with a shallow bog, and the DC of Acrobatics checks in such a square increases by 2.
A square that is part of a deep bog has roughly 4 feet of standing water. It costs Medium or larger creatures 4 squares of movement to move into a square with a deep bog, or characters can swim if they wish. Small or smaller creatures must swim to move through a deep bog. Tumbling is impossible in a deep bog.
The water in a deep bog provides cover for Medium or larger creatures. Smaller creatures gain improved cover (+8 bonus to AC, +4 bonus on Reflex saves). Medium or larger creatures can crouch as a move action to gain this improved cover. Creatures with this improved cover take a –10 penalty on attacks against creatures that aren't underwater.
Deep bog squares are usually clustered together and surrounded by an irregular ring of shallow bog squares.
Both shallow and deep bogs increase the DC of Stealth checks by 2.
Undergrowth
The bushes, rushes, and other tall grasses in marshes function as undergrowth does in a forest. A square that is part of a bog does not also have undergrowth.
Quicksand
Patches of quicksand present a deceptively solid appearance (appearing as undergrowth or open land) that might trap careless characters. A character approaching a patch of quicksand at a normal pace is entitled to a DC 8 Survival check to spot the danger before stepping in, but charging or running characters don't have a chance to detect a hidden patch before blundering into it. A typical patch of quicksand is 20 feet in diameter; the momentum of a charging or running character carries him 1d2 × 5 feet into the quicksand.
Effects of Quicksand
Characters in quicksand must make a DC 10 Swim check every round to simply tread water in place, or a DC 15 Swim check to move 5 feet in whatever direction is desired. If a trapped character fails this check by 5 or more, he sinks below the surface and begins to drown whenever he can no longer hold his breath (see the Swim skill description in Using Skills).
Characters below the surface of quicksand may swim back to the surface with a successful Swim check (DC 15, +1 per consecutive round of being under the surface).
Rescue
Pulling out a character trapped in quicksand can be difficult. A rescuer needs a branch, spear haft, rope, or similar tool that enables him to reach the victim with one end of it. Then he must make a DC 15 Strength check to successfully pull the victim, and the victim must make a DC 10 Strength check to hold onto the branch, pole, or rope. If both checks succeed, the victim is pulled 5 feet closer to safety. If the victim fails to hold on, he must make a DC 15 Swim check immediately to stay above the surface.
Hedgerows
Common in moors, hedgerows are tangles of stones, soil, and thorny bushes. Narrow hedgerows function as low walls, and it takes 3 squares of movement to cross them. Wide hedgerows are more than 5 feet tall and take up entire squares. They provide total cover, just as a wall does. It takes 4 squares of movement to move through a square with a wide hedgerow; creatures that succeed on a DC 10 Climb check need only 2 squares of movement to move through the square.
Other Marsh Terrain Elements
Some marshes, particularly swamps, have trees just as forests do, usually clustered in small stands. Paths lead across many marshes, winding to avoid bog areas. As in forests, paths allow normal movement and don't provide the concealment that undergrowth does.
Stealth and Detection in a Marsh
In a marsh, the maximum distance at which a Perception check for detecting the nearby presence of others can succeed is 6d6 × 10 feet. In a swamp, this distance is 2d8 × 10 feet.
Undergrowth and deep bogs provide plentiful concealment, so it's easy to use Stealth in a marsh.
Hills Terrain
A hill can exist in most other types of terrain, but hills can also dominate the landscape. Hills terrain is divided into two categories: gentle hills and rugged hills. Hills terrain often serves as a transition zone between rugged terrain such as mountains and flat terrain such as plains.
Hills Category
| Hills Category | ||
|---|---|---|
| Gentle Hills | Rugged Hills | |
| Gradual slope | 75% | 40% |
| Steep slope | 20% | 50% |
| Cliff | 5% | 10% |
| Light undergrowth | 15% | 15% |
Gradual Slope
This incline isn't steep enough to affect movement, but characters gain a +1 bonus on melee attacks against foes downhill from them.
Steep Slope
Characters moving uphill (to an adjacent square of higher elevation) must spend 2 squares of movement to enter each square of steep slope. Characters running or charging downhill (moving to an adjacent square of lower elevation) must succeed on a DC 10 Acrobatics check upon entering the first steep slope square. Mounted characters make a DC 10 Ride check instead. Characters who fail this check stumble and must end their movement 1d2 × 5 feet later. Characters who fail by 5 or more fall prone in the square where they end their movement. A steep slope increases the DC of Acrobatics checks by 2.
Cliff
A cliff typically requires a DC 15 Climb check to scale and is 1d4 × 10 feet tall, although the needs of your map might mandate a taller cliff. A cliff isn't perfectly vertical, taking up 5-foot squares if it's less than 30 feet tall and 10-foot squares if it's 30 feet or taller.
Light Undergrowth
Sagebrush and other scrubby bushes grow on hills, although they rarely cover the landscape. Light undergrowth provides concealment and increases the DC of Acrobatics and Stealth checks by 2.
Other Hills Terrain Elements
Trees aren't out of place in hills terrain, and valleys often have active streams (5 to 10 feet wide and no more than 5 feet deep) or dry streambeds (treat as a trench 5 to 10 feet across) in them. If you add a stream or streambed, remember that water always flows downhill.
Stealth and Detection in Hills
In gentle hills, the maximum distance at which a Perception check for detecting the nearby presence of others can succeed is 2d10 × 10 feet. In rugged hills, this distance is 2d6 × 10 feet.
Hiding in hills terrain can be difficult if there isn't undergrowth around. A hilltop or ridge provides enough cover to hide from anyone below the hilltop or ridge.
Mountain Terrain
The three mountain terrain categories are alpine meadows, rugged mountains, and forbidding mountains. As characters ascend into a mountainous area, they're likely to face each terrain category in turn, beginning with alpine meadows, extending through rugged mountains, and reaching forbidding mountains near the summit.
Mountains have an important terrain element, the rock wall, that is marked on the border between squares rather than taking up squares itself.
Mountain Category
| Mountain Category | |||
|---|---|---|---|
| Alpine Meadow | Rugged | Forbidding | |
| Gradual slope | 50% | 25% | 15% |
| Steep slope | 40% | 55% | 55% |
| Cliff | 10% | 15% | 20% |
| Chasm | — | 5% | 10% |
| Light undergrowth | 20% | 10% | — |
| Scree | — | 20% | 30% |
| Dense rubble | — | 20% | 30% |
Gradual and Steep Slopes
These function as described in Hills Terrain.
Cliff
These terrain elements also function like their hills terrain counterparts, but they're typically 2d6 × 10 feet tall. Cliffs taller than 80 feet take up 20 feet of horizontal space.
Chasm
Usually formed by natural geological processes, chasms function like pits in a dungeon setting. Chasms aren't hidden, so characters won't fall into them by accident (although bull rushes are another story). A typical chasm is 2d4 × 10 feet deep, at least 20 feet long, and anywhere from 5 feet to 20 feet wide. It takes a DC 15 Climb check to climb out of a chasm. In forbidding mountain terrain, chasms are typically 2d8 × 10 feet deep.
Light Undergrowth
This functions as described in Forest Terrain.
Scree
A field of shifting gravel, scree doesn't affect speed, but it can be treacherous on a slope. The DC of Acrobatics checks increases by 2 if there's scree on a gradual slope and by 5 if there's scree on a steep slope. The DC of Stealth checks increases by 2 if the scree is on a slope of any kind.
Dense Rubble
The ground is covered with rocks of all sizes. It costs 2 squares of movement to enter a square with dense rubble. The DC of Acrobatics checks on dense rubble increases by 5, and the DC of Stealth checks increases by 2.
Rock Wall
A vertical plane of stone, rock walls require DC 25 Climb checks to ascend. A typical rock wall is 2d4 × 10 feet tall in rugged mountains and 2d8 × 10 feet tall in forbidding mountains. Rock walls are drawn on the edges of squares, not in the squares themselves.
Cave Entrance
Found in cliff and steep slope squares and next to rock walls, cave entrances are typically between 5 and 20 feet wide and 5 feet deep. A cave could be anything from a simple chamber to the entrance to an elaborate dungeon. Caves used as monster lairs typically have 1d3 rooms that are 1d4 × 10 feet across.
Desert Terrain
Desert terrain exists in warm, temperate, and cold climates, but all deserts share one common trait: little rain. The three categories of desert terrain are tundra (cold desert), rocky deserts (often temperate), and sandy deserts (often warm).
Tundra differs from the other desert categories in two important ways. Because snow and ice cover much of the landscape, it's easy to find water. During the height of summer, the permafrost thaws to a depth of a foot or so, turning the landscape into a vast field of mud. The muddy tundra affects movement and skill use as the shallow bogs described in Marsh Terrain, although there's little standing water.
The table below describes terrain elements found in each of the three desert categories. The terrain elements on this table are mutually exclusive; for instance, a square of tundra might contain either light undergrowth or an ice sheet, but not both.